3 Questions Often Asked About Tire Change
The importance of tires is never in question, but they are often the last thing drivers consider—until there is a problem. There are obvious signs of your tires needing a replacement, but some issues could materialize even if your tires appear normal.
This underscores the importance of changing your tires. Doing so can improve your car’s performance, boost handling and fuel efficiency, and reduce risks from a flat tire.
In this post, we answered three commonly asked questions about changing tires.
1. How Often Should I Change My Tires?
When it comes to how often you should change tires, there are no hard and fast rules. It can vary based on the tires and how you drive.
If you brake heavily, corner fast, and regularly drive over rough road surfaces, it can wear your tires down significantly faster. Moreover, if you fail to have tire rotation and alignments and do not check your tire pressure regularly, such things can also cause tires to wear faster.
Nonetheless, even if you’re not driving your vehicle, the tire’s rubber tires can still degrade. One general rule of thumb is to replace tires that are six to ten years old—no matter how much you drive.
You should also consider changing tires when seasons change. Summer tires are meant to perform well in summer. However, they provide less traction in winter, so you may want winter tires instead. If you don’t like to swap tires, your best bet is to use all-season tires.
2. Should I Repair or Change My Tires?
Just because you have a hole in your tire or a puncture doesn’t mean you should change your tires. Quick and cost-effective tire repair, such as a tire plug or patch, will work in many instances.
However, there are certain instances and scenarios when tire repair isn’t an option, like if:
- The hole or puncture is more than 1/4 of an inch in diameter.
- The remaining tread depth is less than 2/32 of an inch.
- The puncture is in the shoulder or sidewall of the tire.
3. Do I Have Enough Tire Tread to Need a Tire Change?
One of the most critical factors when assessing your tires is the amount of tread remaining. There are several different methods you can use to determine if you have sufficient tire tread:
- Check your tread wear bars. These are small rubber bridges in the grooves between ridges. If your tread bars are flush or level with the pattern, your tires have only 1/16th of the tread remaining. This means you must replace your tires.
- Purchase a depth gauge for a more accurate measurement. This easy-to-use device can give you accurate tread measurements.
- Use the penny test. Simply turn the penny upside down where Lincoln’s head points into the tread. Then place the penny between the treads. If Lincoln’s head disappears, you have at least 2/32″ tread remaining. However, if you can see Lincoln’s entire head, it means you need new tires.
Contact Repair One for New Tires & Other Tire Services in Spring, TX
Whether you need your tires inspected, repaired, or replaced, the mechanics at Repair One in Spring, TX can help. We are the leading auto repair shop in the Spring/Klein area.